AUSTRALIAN ROBOTIC TURN TABLES

Robotic Turn Tables


Roller trestle


Optimal communication between orbital welding machine and welding head

The roller stand is a tool with which it is possible to process large dimensions. As with any of our other welding heads, this communicates in real time with our orbital welding machines.


Thanks to the unique design and gear ratios as well as the use of smooth-running timing belts, it has been possible to implement the tool in conjunction with a “normal” orbital welding system. The parameters of the jacket circumference and speed were implemented by the software.


As with our rotary devices, the same supports for fine adjustment, swivel plates, wire holders, linear units and hose packages can be used in gas or water-cooled versions.

Roller stand TR 1000

With the TR 1000 roller stand, connections between pipes can be made, e.g. B. bends, T-pieces, flanges etc. can be carried out.


Details:

Description:

  • Thanks to flexible adjustment using the hydraulic 3xd torch arm, fillet welds, butt welds, face and flanged seams are possible. 
  • Driven via toothed belt drive
  • Back pressure over 400 Nm shock absorbers
  • Torch clamp for standard TIG torch handle shell (gas or water cooled)
  • Repeatable torch movement with stops using a linear sliding unit
  • Clamping lever and large knurled nuts can be adjusted without tools. Laser engraving for adjusting the rollers


Scope of Delivery:

  • Roller stand with connected motor control cable (5m) and ground cable (5m)
  • Linear unit with 3xd link arm and torch clamp 


Technical Data:

  • Weight: 25 kg (including TIG torch 2,000 mm, gas cooled) 
  • Size: 710mm x 500mm x 730mm
  • Scope: DA 20 mm to DA 323 mm
  • Other sizes (up to approx. DA 1,000 mm) on request, with table frame or mobile.
  • Size: 600mm x 660mm x 1110mm


Roller stand TR 1000 >>

Turn tables


Versatile use for orbital welding assemblies

With the turn tables TURN 100 System and TURN 250 two high-quality tools are available, which round up the range of the most-known orbital welding tools (open weld heads, closed weld heads, tube-to-tubesheet weld heads). With these tools you are able to weld components, which can not be clamped in one of the above mentioned tools. Each turn table has hollow shafts, which enable the forming of the components, which have to be welded. The turn tables are offered with encoder-engine-gear-unit or with tacho-engine-unit. This enables the operation on welding systems of our competitors.


TURN 100

Our TURN 100 turntables may be less well known than our standard orbital welding tools (open welding tongs, closed welding tongs, tube-to-tubesheet weld heads) but they are the perfect addition to our range. They enable you to weld components and assemblies even when the workpieces cannot be clamped in any of the tools referred to above. They feature a hollow shaft for forming the assemblies that you are welding.


Details:

  • 100 mm three-jaw chuck with hollow shaft (16 mm) for forming
  • Turntable can be mounted on a model 16 perforated table
  • A multiple number of connection options (pneumatic clamping cylinder, tailstock, linear guide units, etc.)
  • Variable work plate size
  • If necessary, can be mounted on a mobile welding trolley


Scope of Delivery:

  • Turntable
  • Perforated plate
  • Torch holder on 3D articulated arm
  • Linear support with 2 limit stops


TURN 100 information >>

TURN 250

The turn table TURN 250 has an area of application of OD 20 mm – OD 250 mm.


Details:

  • The TURN 250 has an area of application of OD 20 mm up to OD 250 mm. For the forming a hollow shaft of 70 mm is available.


TURN 250 information >>